800 Lt. Hot Dip Dump Trash Container Lid
- Body opening 25 x 50 mm. Surrounded by a U-profile.
- Housing complete with a source of gas metal arc welded slag free.
- Cover 1.5 mm. one-piece sheet strength and aesthetics were plastered.
- Lid opening handle, lock with armrest and increasing internal resistance profile reinforcement.
- TS EN 840-3 Standard Compliance Certificates container.
- The front surface; municipal name, trash blown human figure and the slogan Let’s keep our environment clean is written.
- Body 2 mm. increased strength of the body and sides of the pressed sheet metal bends in one piece. Body as 1.5 cm. Grasp the base of the body by bending the corners and top of the back of the mouth radüslüdür outside.
- Suitable lifting apparatus on the vehicle lift arms 45 x 10 cm. 4 mm in size. sheet drilled 16 mm. arm round the top and bottom welded to the body by boiling.
- Carrier 4 pcs Large Maşalı 360 º swivel head turnable plate at least 3.50 mm in size 160 x 45. TS EN 12532 standard is available at a time. Wheel connecting the foot plate 4.00 mm. respectively.
- Container, technical illustration, and were manufactured according to specifications complete with Hot Dip Galvanizing system TS 914 EN IS0 1461 standard galvanized 80-90 microns.
important Note ; Blink loses its ability to galvanize welds in galvanized containers, retouched with paint. Galvanized coating thickness of 10 microns. A container made of hot-dip galvanized whether, after the completion of welding processes complete the entire surface of hot dip galvanizing system (including sources) 80-90 micron thick galvanizlenip, long life can be ensured.