400 Lt. Flat Lid Galvanized Garbage Container
- Body optionally be made of 1.5 mm or 2 mm galvanized sheet and prints the front and side faces will die.
- Plug-in base plate to the bottom of the tray-shaped body, and will be sealed.
- Body mouth 20 X 50 mm. internal teeth size “U” profile converted.
- 3 mm in feet is connected to the wheels. is to be manufactured as a single piece of galvanized steel reinforcement plate will be welded to the body in the foot.
- Container side lifting lugs 4 mm. will be produced as a single piece of sheet metal.
- Press prints on a single sheet of 1.5 mm cover will curl up, all the edges of the “U” profile will be twisted and hinged to the body shall be manufactured fully opened. Will be opening handle on the lid.
- 2 x 360-degree swivel and 2 fixed wheels, 4 units will be 150 X 45 size carrier.
- The desired name on the front of the container, garbage throwing slogans written on the human figure and the desired image.
- Wheels will be used in the TS EN 12532 quality certified.
- TS EN 1501-1 standard container lifts and carriers shall comply with the norms.
- TS EN 840-2 will be quality certified container.
Important Note ; Blink loses its ability to galvanize welds in galvanized steel containers, paint rütuşlanır. Galvanized coating thickness of 20 microns. Hot-dip galvanized after welding operations in the container is manufactured and complete the entire surface of hot dip galvanizing system (including resources) 80-90 micron thick galvanizlenip, long life can be ensured.